Surveillance, Vishno and AVE conferences

›8:30 (45min)

Automatic expert condition monitoring : focus on a non-stationary index and the demodulation process
N. Martin

› Auditorium "La Rotonde"

8:30 - 9:15 (45min)

Automatic expert condition monitoring : focus on a non-stationary index and the demodulation process

Auditorium "La Rotonde"

N. Martin

›9:15 (45min)

Smart dynamic systems for exterior body panels in automotive industry
J. Grando

› Auditorium "La Rotonde"

9:15 - 10:00 (45min)

Smart dynamic systems for exterior body panels in automotive industry

Auditorium "La Rotonde"

J. Grando

›10:00 (30min)

Time for Industry

› Auditorium "La Rotonde"

10:00 - 10:30 (30min)

Time for Industry

Auditorium "La Rotonde"

›10:30 (20min)

Coffee break

10:30 - 10:50 (20min)

Coffee break

›10:50 (1h40)

Angular approaches
H. André

› Amphi Ouest

10:50 - 12:30 (1h40)

Angular approaches

Amphi Ouest

H. André

› Numerical and experimental loads analysis on a horizontal-axis wind turbine in yaw - Davide Astolfi, University of Perugia 10:50-11:10 (20min)

› Gears and Bearings faults Detection: from Instrumentation to Classification - Sylvain Barcet, Vibratec 11:30-11:50 (20min)

› Ball bearing diagnostics based on statistical metrics of cyclostationarity - Marco Cocconcelli, Department of Science and Engineering Methods, University of Modena and Reggio Emilia 11:50-12:10 (20min)

› Measurement and use of transmission error for diagnostics of gears - Pietro Borghesani, School of Mechanical and Manufacturing Engineering University of New South Wales 12:10-12:30 (20min)

›10:50 (1h40)

Fault diagnosis and prognosis for rolling bearings
F. Bonnardot

› Amphi Est

10:50 - 12:30 (1h40)

Fault diagnosis and prognosis for rolling bearings

Amphi Est

F. Bonnardot

› A non-parametric generalization of the synchronous average in the cyclo-non-stationary framework - Amadou Assoumane, Safran Group 10:50-11:10 (20min)

› High Frequency Demodulation Technique for Instantaneous Angular Speed Estimation - Frédéric Bonnardot, Laboratoire dÁnalyse des Signaux et des Processus Industriels - Khalid Lizoul, Laboratoire dÁnalyse des Signaux et des Processus Industriels 11:10-11:30 (20min)

› Development of a vibration monitoring strategy based on cyclostationary analysis for the predictive maintenance of helicopter gearbox bearings - Valerio Camerini, Airbus [France] 11:30-11:50 (20min)

› A new indicator designed from the spectral coherence, proposition and application to bearing diagnosis - Souhayb KASS, Doctoral School of Science and Technology, Lebanese University, Tripoli, Lebanon, Laboratoire Vibrations Acoustique, Univ Lyon, INSA-Lyon, LVA EA677, F-69621 Villeurbanne, France - Amani RAAD, Engineering faculty, Lebanese University, Tripoli, Lebanon - Jérôme ANTONI, Laboratoire Vibrations Acoustique, Univ Lyon, INSA-Lyon, LVA EA677, F-69621 Villeurbanne, France 11:50-12:10 (20min)

› Multi band integration on the cyclostationary bivariable methods for bearing diagnostics. - Alexandre Mauricio, Dynamics of Mechanical and Mechatronic Systems, Flanders Make, KU Leuven, Faculty of Engineering Science, Department of Mechanical Engineering, Division PMA, Celestijnenlaan 300 B, B-3001, Heverlee, Belgium 12:10-12:30 (20min)

›10:50 (1h40)

Data Mining Classification & Machine Learning methods
L. Garibaldi

› "René Char"

10:50 - 12:30 (1h40)

Data Mining Classification & Machine Learning methods

"René Char"

L. Garibaldi

› Wind turbine gearboxes fault detection through on-site measurements and vibration signal processing - Francesco Castellani, University of Perugia 11:30-11:50 (20min)

› Gears and bearings defaults: from classification to diagnosis using machine learning - Sylvain Barcet, Vibratec 11:50-12:10 (20min)

› Vibration Feature for Detecting Eccentric Workpiece/Runout Faults During Continuous Gear Grinding Processes - agusmian partogi ompusunggu, Flanders Make vzw 12:10-12:30 (20min)

›10:50 (1h20)

Passive control of vibrations
X. Chiementin

› Auditorium "La Rotonde"

10:50 - 12:10 (1h20)

Passive control of vibrations

Auditorium "La Rotonde"

X. Chiementin

› Experimental identification of the corrective effect of a non-circular pulley : application to timing belt drive dynamics - Sébastien PASSOS, LaMCoS, Groupe PSA 10:50-11:10 (20min)

› Robust optimization of nonlinear energy sinks used for dynamic instabilities mitigation of an uncertain friction system - Cherif Snoun, Laboratoire de Mécanique Gabriel Lamé 11:10-11:30 (20min)

› Energy exchange between a nonlinear absorber and a pendulum under parametric excitation - Gabriel Hurel, Univ. Lyon, ENTPE, LTDS UMR CNRS 5513, rue Maurice Audin, 69518 Vaulx-en-Velin, France 11:30-11:50 (20min)

› Methodology for the robust design of a network of dynamic vibration absorbers - Kévin Jaboviste, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174) 11:50-12:10 (20min)

›12:30 (1h10)

Lunch

12:30 - 13:40 (1h10)

Lunch

›13:40 (2h)

Tutorial - Benefits of Hilbert transform based methods of phase/frequency demodulation for order tracking and machine speed determination
Bob Randall

› 107

13:40 - 15:40 (2h)

Tutorial - Benefits of Hilbert transform based methods of phase/frequency demodulation for order tracking and machine speed determination

107

Bob Randall

›13:40 (1h40)

Modeling and identification of mechanical systems
R. Serra

› Amphi Est

13:40 - 15:20 (1h40)

Modeling and identification of mechanical systems

Amphi Est

R. Serra

› Numerical and experimental analyses to enhance the vibration response of rotary transfer machines - Alberto Martini, University of Bologna - Department of Industrial Engineering (DIN) 13:40-14:00 (20min)

› Bifurcation Tracking and sub-harmonic isola detection in nonlinear mechanical systems - Roberto Alcorta, Univ Lyon, INSA-Lyon, CNRS UMR5259, LaMCoS, F-69621, France 14:00-14:20 (20min)

› Localization and quantification of damage by frequency based methods : Numerical and Experimental applications on bending vibration beams - Anurag Dubey, Laboratoire de Mécanique Gabriel Lamé 14:20-14:40 (20min)

› ARX model for experimental vibration analysis of grinding process by flexible manipulator - Quoc-Cuong Nguyen, Mechanical Engineering Department, Ecole de technologie supérieure, Montreal (Qc), H3C 1K3 14:40-15:00 (20min)

› Use of virtual sensors for the analysis of forces exerted by the load inside a tumbling mill - Cristián Molina Vicuna, Laboratorio de Vibraciones Mecánicas, Departamento de Ingeniería Mecánica, Universidad de Concepción 15:00-15:20 (20min)

›13:40 (1h)

Angular approaches
Q. Leclere

› "René Char"

13:40 - 14:40 (1h)

Angular approaches

"René Char"

Q. Leclere

› Rolling bearing diagnosis based on H_infinity filter order tracking - Amadou Assoumane, SAFRAN GROUP 13:40-14:00 (20min)

› Dynamic Characterization Of Hydroelectric Turbine In Transient Using OBMA And Phase-Shift Analysis - 14:00-14:20 (20min)

› A new method for identifying diagnostic rich frequency bands under varying operating conditions - Stephan Schmidt, Centre for Asset Integrity Management, University of Pretoria, Pretoria, South Africa 14:20-14:40 (20min)

›13:40 (1h)

Smart Structures
O. Bareille

› Amphi Ouest

13:40 - 14:40 (1h)

Smart Structures

Amphi Ouest

O. Bareille

› Hybrid crankshaft control for the reduction of torsional vibrations and rotational irregularities - Guillaume Paillot, Institut National des Sciences Appliquées de Lyon 13:40-14:00 (20min)

› Semi-active torsional vibrations control of a rotor using a smart electro-rheological dynamic absorber - Yulan Sun, École de Technologie Supérieure-Montréal 14:00-14:20 (20min)

› Shunted piezoelectrical flextensionnal suspension for vibration insulation - Kevin Billon, LaMCoS 14:20-14:40 (20min)

›14:50 (1h)

Data Mining Classification & Machine Learning methods
N. Vyas

› "René Char"

14:50 - 15:50 (1h)

Data Mining Classification & Machine Learning methods

"René Char"

N. Vyas

› Toward the quality prognostic of an aircraft engine workpiece in Inconel Alloy 625: case study and proposed system architecture - Antoine Proteau, Ecole de Technologie Supérieure [Montréal] 14:50-15:10 (20min)

› A Deep Learning-based Approach for fault diagnosis: Application to Bearing Fault Detection - KHALID DAHI, Ecole Centrale Casablanca 15:10-15:30 (20min)

› Fault prognosis of planetary gearbox using acoustic emission and genetic algorithm: a case study - Felix Leaman, RWTH Aachen University 15:30-15:50 (20min)

›14:50 (1h)

Smart Structures
M. Ouisse

› Amphi Ouest

14:50 - 15:50 (1h)

Smart Structures

Amphi Ouest

M. Ouisse

› Programmable band-gaps in periodic structures - Gaël Matten, Univ. Bourgogne Franche-Comté, FEMTO-ST Institute, CNRS/UFC/ENSMM/UTBM 14:50-15:10 (20min)

› Exploring periodicity and dispersion diagrams in muffler design - Vinicius D. Lima, University of Campinas [Campinas] - Belisario N. Huallpa, Federal University of Lavras - José Roberto Arruda, Departamento de Mecânica Computacional, Faculdade de Engenharia Mecânica, Universidade Estadual de Campinas 15:10-15:30 (20min)

›15:50 (40min)

Poster Session - Coffee break

15:50 - 16:30 (40min)

Poster Session - Coffee break

›16:30 (1h)

Diagnostics and Dynamic models
S. Heyns

› Amphi Est

16:30 - 17:30 (1h)

Diagnostics and Dynamic models

Amphi Est

S. Heyns

› Challenging the multiplicative model used for gear vibration - Pietro Borghesani, University of New South Wales [Sydney] 16:30-16:50 (20min)

› Detection sensitivity study of local faults in spur gears based on realistic simulations - Lior Bachar, PHM Laboratory, Department of Mechanical Engineering, Ben-Gurion University of the Negev, P.O.B. 653, Beer-Sheva 8410501 16:50-17:10 (20min)

› Towards a better understanding of helical gears vibrations – dynamic model validated experimentally - nadav silverman, Ben Gurion University 17:10-17:30 (20min)

›16:30 (1h)

Signal processing
J.-L. Dion

› Auditorium "La Rotonde"

16:30 - 17:30 (1h)

Signal processing

Auditorium "La Rotonde"

J.-L. Dion

› Comparison and Improvement of Techniques for Transmission-Path Restoring - Omri Matania, PHM Lab, Department of Mechanical Engineering, Ben-Gurion University of the Negev, 16:30-16:50 (20min)

› Influence of Gaussian Signal Distribution Error on Random Vibration Fatigue Calculations - Yuzhu Wang, Laboratoire de Mécanique Gabriel Lamé 16:50-17:10 (20min)

› Helicopter transmission gearbox fault detection using an enhanced minimum entropy deconvolution adjusted method - Xin Zhang, Univ Lyon, INSA-Lyon, School of Aeronautics and Astronautics, Sichuan University 17:10-17:30 (20min)

›16:30 (1h)

Data Mining Classification & Machine Learning methods
J. Antoni

› Amphi Ouest

16:30 - 17:30 (1h)

Data Mining Classification & Machine Learning methods

Amphi Ouest

J. Antoni

› Rotating machine diagnosis using acoustic imaging and artificial intelligence - 16:30-16:50 (20min)

› Macroscopic-Microscopic Attention in LSTM Networks based on fusion Features for prediction of bearing remaining life - yi qin, State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, College of Mechanical Engineering, Chongqing University, Chongqing 400044 - Sheng Xiang, College of Mechanical Engineering, Chongqing University, Chongqing 400044, State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044 - Haoran Yan, State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, College of Mechanical Engineering, Chongqing University, Chongqing 400044 16:50-17:10 (20min)

› Milling diagnosis using machine learning approaches - Dominique Knittel, University of Strasbourg, Faculty of Physics and Engineering, Laboratoire d'étude des microstructures et de mécanique des matériaux 17:10-17:30 (20min)

›19:30 (2h30)

GALA DINNER (please be at the boat before 20:00, then it will travel on the river)

19:30 - 22:00 (2h30)

GALA DINNER (please be at the boat before 20:00, then it will travel on the river)