Scientific program > Interactive Program
| Time |
Event |
|
|
08:00 - 09:00
|
Registration and Coffee - Registration and Coffee in the Agora of "La Rotonde" |
|
|
09:00 - 09:20
|
Welcome and Opening (Auditorium "La Rotonde") - J. Antoni, D. Rémond |
|
|
09:20 - 10:05
|
Dynamics of Time-Dependent and Spatially Modulated Metamaterials (Auditorium "La Rotonde") - Massimo Ruzzene |
|
|
10:05 - 10:35
|
Coffee break |
|
|
10:20 - 12:20
|
Tutorial - Error characterization in modal analysis and model updating. An overview of tools and procedures using the Structural Dynamics Toolbox (107) - E. Balmes |
|
|
10:40 - 12:00
|
Signal processing (Amphi Est) - C. Capdessus |
|
| 10:40 - 11:00 |
› Selection of Condition Indicators for Improved Gear Fault Detection - Eric Bechhoefer, GPMS Inc |
|
| 11:00 - 11:20 |
› Autonomous Embedded Vibroacoustic Measurements: an efficient tool for railway monitoring - Christian Clerc, Vibratec - Romain AUGEZ, VIBRATEC |
|
| 11:20 - 11:40 |
› Blind vibration filtering using envelope spectrum indicators for bearing and gear fault detection without knowledge of machine kinematics - Peeters Cédric, Vrije Universiteit [Brussel] |
|
| 11:40 - 12:00 |
› Vibration representation in time and phase domains, applications to aircraft engines - Julien GRIFFATON, Safran Aircraft Engines |
|
|
10:40 - 12:00
|
Modeling and identification of mechanical systems (Amphi Ouest) - R. Arruda |
|
| 10:40 - 11:00 |
› A benchmark study on the configuration of metaporoelastic interfaces for acoustic isolation enhancement. - Thomas Weisser, IRIMAS (EA7499) |
|
| 11:00 - 11:20 |
› The Dynamics of Helicopters with Nonlinearities on the Fuselage - Leonardo Sanches, Université de Toulouse |
|
| 11:20 - 11:40 |
› Comparison of pseudo-static and modal spectral seismic analyses of motor-driven pump units: is 1.5 security coefficient of pseudo-static method relevant? - Sylvie AUDEBERT, EDF Recherche et Développement, Institut des Sciences de la mécanique et Applications industrielles |
|
| 11:40 - 12:00 |
› Characterization of the damping added by a foam on a plate by an inverse vibration problem - Meryem Le Deunf, Laboratoire dácoustique de lúniversité du Mans, CEVAA |
|
|
10:40 - 12:00
|
Electrical motors ("René Char") - A. Soualhi |
|
| 10:40 - 11:00 |
› Long-term vibration monitoring of induction motors in the food industry with low-cost MEMS accelerometers - agusmian ompusunggu, Flanders Make |
|
| 11:00 - 11:20 |
› Structural dynamics of electric machines subjected to PWM excitations - Margaux TOPENOT, Alstom - Ornans, Département de Mécanique, FEMTO-ST |
|
| 11:20 - 11:40 |
› Experimental evidence of MCSA for the diagnosis of ball-bearings - Marco Cocconcelli, Department of Science and Engineering Methods, University of Modena and Reggio Emilia |
|
| 11:40 - 12:00 |
› Multi-physics modeling of asynchronous electrical machines in non-stationary conditions with eccentric rotor - XIAOWEN LI, Leroy Somer, Univ Lyon, INSA-Lyon, CNRS UMR5259, LaMCoS, F-69621, France |
|
|
12:00 - 13:30
|
Lunch |
|
|
13:30 - 14:50
|
Angular approaches ("René Char") - P. Clément |
|
| 13:30 - 13:50 |
› Cyclo-non-stationary analysis for bearing fault identification based on instantaneous angular speed estimation - Edgar F. Sierra-Alonso, Universidad Nacional de Colombia (COLOMBIA), Institut national des sciences appliquées de Lyon |
|
| 13:50 - 14:10 |
› Investigation of the Influence of the Operating Parameters on theMagnetic Encoder Geometric Error Compensation - Halil Ibrahim Cakar, Laboratoire dÁnalyse des Signaux et des Processus Industriels, ECAM Lyon - Hugo André, Laboratoire d'Analyse des Signaux et des Processus Industriels |
|
| 14:10 - 14:30 |
› Interpolation of periodic hidden signal measured at steady-operating conditions on hydroelectric turbine runners |
|
|
13:30 - 14:50
|
Diagnostics and Dynamic models (Amphi Est) - R. Klein |
|
| 13:30 - 13:50 |
› Characterization of a Bouc-Wen model-based damper model for automobile comfort simulation - Hanwei GAO, Technocentre Renault [Guyancourt], Laboratoire de Tribologie et Dynamique des Systèmes |
|
| 13:50 - 14:10 |
› Modal identification of machining robots - Asia MAAMAR, Université Clermont Auvergne, CNRS, SIGMA Clermont |
|
| 14:10 - 14:30 |
› Demodulating of the 3-D tip clearance of turbine blades using BP neural network optimized by genetic algorithm - hongcheng liu, School of Mechanical Engineering - Xi'an Jiaotong University |
|
| 14:30 - 14:50 |
› Research on the Variation Mechanism of the 3-D Tip Clearance of a Cracked Blade under Multi-parameters in the Aero-engine Acceleration Process - Yiwei Xiong, School of Mechanical Engineering - Xi'an Jiaotong University |
|
|
13:30 - 14:50
|
Modeling and identification of mechanical systems (Auditorium "La Rotonde") - T. Weisser |
|
| 13:30 - 13:50 |
› Numerical simulation for finding the free surface of liquid in an open container with horizontal acceleration - Reza BABAJANIVALASHEDI, Laboratoire QUARTZ EA 7393 - SUPMECA Paris |
|
| 13:50 - 14:10 |
› Coupled bending torsional vibrations of non-ideal energy source rotors going through critical speeds - Emna SGHAIER, LaMCoS, SUPMECA - Institut supérieur de mécanique de Paris |
|
| 14:10 - 14:30 |
› NAFID - A Grid Tool for output only modal analysis - Viet-Hung Vu, ecole de technologie superieure |
|
| 14:30 - 14:50 |
› Study of the static and dynamic behaviour of PU foam: from the material sample to the automotive seat. - Corentin Blanchard, FAURECIA Sièges Automobile S.A., Institut de Recherche en Informatique, Mathématiques, Automatique et Signal |
|
|
13:30 - 14:50
|
Uncertainties, stochastic, robustness (Amphi Ouest) - S. Berger |
|
| 13:30 - 13:50 |
› Robust design of damping devices constitued of viscoelastic materials - Kévin Jaboviste, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174) |
|
| 13:50 - 14:10 |
› A model reduction method to analyze the dynamic behavior of vibrating structures with uncertain parameters - Duc-Thinh Kieu, Laboratoire de Mécanique Gabriel LaMé |
|
| 14:10 - 14:30 |
› On the monitoring of noisy data as a multidimensional shell - Martin Gagnon, Institut de recherche d'Hydro-Québec |
|
| 14:30 - 14:50 |
› Confounding factors analysis and compensation for high-speed bearing diagnostics - Alessandro Paolo Daga, Politecnico di Torino |
|
|
14:50 - 15:40
|
Coffee break |
|
|
15:40 - 16:40
|
Jointed Structures (Amphi Est) - E. Sadoulet-Reboul |
|
| 15:40 - 16:00 |
› Identification through Frequency-Domain Methods of Hysteretic Models for Bolted Joints of Assembled Structures - Rafael Teloli, São Paulo State University (UNESP) - Faculdade de Engenharia de Ilha Solteira |
|
| 16:00 - 16:20 |
› Fixed point Algorithm resolution and model reduction for jointed structures dynamic simulation. - Anthony Meurdefroid, Laboratoire QUARTZ - SUPMECA EA 7393 |
|
| 16:20 - 16:40 |
› Modelling the damping at the junction between two sub-structures by non-linear models : improving the model and the resolution - VERONIQUE KEHR-CANDILLE, ONERA, Department of Material and Structures, Chatillon |
|
|
15:40 - 16:40
|
Fault diagnosis and prognosis for rolling bearings (Auditorium "La Rotonde") - M. Cocconcelli |
|
| 15:40 - 16:00 |
› Fourier-Bessel series expansion based blind deconvolution method for bearing fault detection - Elia Soave, Department of Engineering, University of Ferrara (ENDIF-UNIFE) |
|
| 16:00 - 16:20 |
› Combination of vibration analysis and Acoustic Emission measurements to better characterize damage and mechanical behaviour of aerospace high speed rolling bearing - HEBRARD Yoann, Engineer |
|
| 16:20 - 16:40 |
› Neuroevolution for bearing diagnosis - AMANI RAAD, Faculty of Engineering I, Lebanese University, Lebanon |
|
|
15:40 - 16:40
|
Condition Monitoring ("René Char") - Y. Guo |
|
| 15:40 - 16:00 |
› Edge computing for advanced vibration signal processing - Jan Helsen - Vrije Universiteit [Brussel] |
|
| 16:00 - 16:20 |
› Remote diagnosis by analyzing heterogeneous data - François Chanel, EDF R&D |
|
| 16:20 - 16:40 |
› Tool condition monitoring method in milling process using wavelet transform and long short-term memory - Fatemeh Aghazadeh, ecole de technologie superieure |
|
|
15:40 - 16:40
|
Smart Structures (Amphi Ouest) - S. Chesné |
|
| 15:40 - 16:00 |
› Embedded sensing micro-components for fibre reinforced composite material systhesis and monitoring - Xiaopeng Cui, Laboratoire de Tribologie et Dynamique des Systèmes |
|
| 16:00 - 16:20 |
› Temperature control of a composite core for adaptive stiffness and damping - Morvan Ouisse, UBFC/FEMTO-ST |
|
| 16:20 - 16:40 |
› Vibration Control of Cable-Driven Parallel Robot for 3D Printing - Florian LACAZE, INSA Lyon - LaMCoS |
|
|
18:30 - 22:00
|
Cocktail at "Musée des Confluences" |
|
| Time |
Event |
|
|
08:30 - 09:15
|
Automatic expert condition monitoring : focus on a non-stationary index and the demodulation process (Auditorium "La Rotonde") - N. Martin |
|
|
09:15 - 10:00
|
Smart dynamic systems for exterior body panels in automotive industry (Auditorium "La Rotonde") - J. Grando |
|
|
10:00 - 10:30
|
Time for Industry (Auditorium "La Rotonde") |
|
|
10:30 - 10:50
|
Coffee break |
|
|
10:50 - 12:30
|
Angular approaches (Amphi Ouest) - H. André |
|
| 10:50 - 11:10 |
› Numerical and experimental loads analysis on a horizontal-axis wind turbine in yaw - Davide Astolfi, University of Perugia |
|
| 11:30 - 11:50 |
› Gears and Bearings faults Detection: from Instrumentation to Classification - Sylvain Barcet, Vibratec |
|
| 11:50 - 12:10 |
› Ball bearing diagnostics based on statistical metrics of cyclostationarity - Marco Cocconcelli, Department of Science and Engineering Methods, University of Modena and Reggio Emilia |
|
| 12:10 - 12:30 |
› Measurement and use of transmission error for diagnostics of gears - Pietro Borghesani, School of Mechanical and Manufacturing Engineering University of New South Wales |
|
|
10:50 - 12:30
|
Fault diagnosis and prognosis for rolling bearings (Amphi Est) - F. Bonnardot |
|
| 10:50 - 11:10 |
› A non-parametric generalization of the synchronous average in the cyclo-non-stationary framework - Amadou Assoumane, Safran Group |
|
| 11:10 - 11:30 |
› High Frequency Demodulation Technique for Instantaneous Angular Speed Estimation - Frédéric Bonnardot, Laboratoire dÁnalyse des Signaux et des Processus Industriels - Khalid Lizoul, Laboratoire dÁnalyse des Signaux et des Processus Industriels |
|
| 11:30 - 11:50 |
› Development of a vibration monitoring strategy based on cyclostationary analysis for the predictive maintenance of helicopter gearbox bearings - Valerio Camerini, Airbus [France] |
|
| 11:50 - 12:10 |
› A new indicator designed from the spectral coherence, proposition and application to bearing diagnosis - Souhayb KASS, Doctoral School of Science and Technology, Lebanese University, Tripoli, Lebanon, Laboratoire Vibrations Acoustique, Univ Lyon, INSA-Lyon, LVA EA677, F-69621 Villeurbanne, France - Amani RAAD, Engineering faculty, Lebanese University, Tripoli, Lebanon - Jérôme ANTONI, Laboratoire Vibrations Acoustique, Univ Lyon, INSA-Lyon, LVA EA677, F-69621 Villeurbanne, France |
|
| 12:10 - 12:30 |
› Multi band integration on the cyclostationary bivariable methods for bearing diagnostics. - Alexandre Mauricio, Dynamics of Mechanical and Mechatronic Systems, Flanders Make, KU Leuven, Faculty of Engineering Science, Department of Mechanical Engineering, Division PMA, Celestijnenlaan 300 B, B-3001, Heverlee, Belgium |
|
|
10:50 - 12:30
|
Data Mining Classification & Machine Learning methods ("René Char") - L. Garibaldi |
|
| 11:30 - 11:50 |
› Wind turbine gearboxes fault detection through on-site measurements and vibration signal processing - Francesco Castellani, University of Perugia |
|
| 11:50 - 12:10 |
› Gears and bearings defaults: from classification to diagnosis using machine learning - Sylvain Barcet, Vibratec |
|
| 12:10 - 12:30 |
› Vibration Feature for Detecting Eccentric Workpiece/Runout Faults During Continuous Gear Grinding Processes - agusmian partogi ompusunggu, Flanders Make vzw |
|
|
10:50 - 12:10
|
Passive control of vibrations (Auditorium "La Rotonde") - X. Chiementin |
|
| 10:50 - 11:10 |
› Experimental identification of the corrective effect of a non-circular pulley : application to timing belt drive dynamics - Sébastien PASSOS, LaMCoS, Groupe PSA |
|
| 11:10 - 11:30 |
› Robust optimization of nonlinear energy sinks used for dynamic instabilities mitigation of an uncertain friction system - Cherif Snoun, Laboratoire de Mécanique Gabriel Lamé |
|
| 11:30 - 11:50 |
› Energy exchange between a nonlinear absorber and a pendulum under parametric excitation - Gabriel Hurel, Univ. Lyon, ENTPE, LTDS UMR CNRS 5513, rue Maurice Audin, 69518 Vaulx-en-Velin, France |
|
| 11:50 - 12:10 |
› Methodology for the robust design of a network of dynamic vibration absorbers - Kévin Jaboviste, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174) |
|
|
12:30 - 13:40
|
Lunch |
|
|
13:40 - 15:40
|
Tutorial - Benefits of Hilbert transform based methods of phase/frequency demodulation for order tracking and machine speed determination (107) - Bob Randall |
|
|
13:40 - 15:20
|
Modeling and identification of mechanical systems (Amphi Est) - R. Serra |
|
| 13:40 - 14:00 |
› Numerical and experimental analyses to enhance the vibration response of rotary transfer machines - Alberto Martini, University of Bologna - Department of Industrial Engineering (DIN) |
|
| 14:00 - 14:20 |
› Bifurcation Tracking and sub-harmonic isola detection in nonlinear mechanical systems - Roberto Alcorta, Univ Lyon, INSA-Lyon, CNRS UMR5259, LaMCoS, F-69621, France |
|
| 14:20 - 14:40 |
› Localization and quantification of damage by frequency based methods : Numerical and Experimental applications on bending vibration beams - Anurag Dubey, Laboratoire de Mécanique Gabriel Lamé |
|
| 14:40 - 15:00 |
› ARX model for experimental vibration analysis of grinding process by flexible manipulator - Quoc-Cuong Nguyen, Mechanical Engineering Department, Ecole de technologie supérieure, Montreal (Qc), H3C 1K3 |
|
| 15:00 - 15:20 |
› Use of virtual sensors for the analysis of forces exerted by the load inside a tumbling mill - Cristián Molina Vicuna, Laboratorio de Vibraciones Mecánicas, Departamento de Ingeniería Mecánica, Universidad de Concepción |
|
|
13:40 - 14:40
|
Angular approaches ("René Char") - Q. Leclere |
|
| 13:40 - 14:00 |
› Rolling bearing diagnosis based on H_infinity filter order tracking - Amadou Assoumane, SAFRAN GROUP |
|
| 14:00 - 14:20 |
› Dynamic Characterization Of Hydroelectric Turbine In Transient Using OBMA And Phase-Shift Analysis |
|
| 14:20 - 14:40 |
› A new method for identifying diagnostic rich frequency bands under varying operating conditions - Stephan Schmidt, Centre for Asset Integrity Management, University of Pretoria, Pretoria, South Africa |
|
|
13:40 - 14:40
|
Smart Structures (Amphi Ouest) - O. Bareille |
|
| 13:40 - 14:00 |
› Hybrid crankshaft control for the reduction of torsional vibrations and rotational irregularities - Guillaume Paillot, Institut National des Sciences Appliquées de Lyon |
|
| 14:00 - 14:20 |
› Semi-active torsional vibrations control of a rotor using a smart electro-rheological dynamic absorber - Yulan Sun, École de Technologie Supérieure-Montréal |
|
| 14:20 - 14:40 |
› Shunted piezoelectrical flextensionnal suspension for vibration insulation - Kevin Billon, LaMCoS |
|
|
14:50 - 15:50
|
Data Mining Classification & Machine Learning methods ("René Char") - N. Vyas |
|
| 14:50 - 15:10 |
› Toward the quality prognostic of an aircraft engine workpiece in Inconel Alloy 625: case study and proposed system architecture - Antoine Proteau, Ecole de Technologie Supérieure [Montréal] |
|
| 15:10 - 15:30 |
› A Deep Learning-based Approach for fault diagnosis: Application to Bearing Fault Detection - KHALID DAHI, Ecole Centrale Casablanca |
|
| 15:30 - 15:50 |
› Fault prognosis of planetary gearbox using acoustic emission and genetic algorithm: a case study - Felix Leaman, RWTH Aachen University |
|
|
14:50 - 15:50
|
Smart Structures (Amphi Ouest) - M. Ouisse |
|
| 14:50 - 15:10 |
› Programmable band-gaps in periodic structures - Gaël Matten, Univ. Bourgogne Franche-Comté, FEMTO-ST Institute, CNRS/UFC/ENSMM/UTBM |
|
| 15:10 - 15:30 |
› Exploring periodicity and dispersion diagrams in muffler design - Vinicius D. Lima, University of Campinas [Campinas] - Belisario N. Huallpa, Federal University of Lavras - José Roberto Arruda, Departamento de Mecânica Computacional, Faculdade de Engenharia Mecânica, Universidade Estadual de Campinas |
|
|
15:50 - 16:30
|
Poster Session - Coffee break |
|
|
16:30 - 17:30
|
Diagnostics and Dynamic models (Amphi Est) - S. Heyns |
|
| 16:30 - 16:50 |
› Challenging the multiplicative model used for gear vibration - Pietro Borghesani, University of New South Wales [Sydney] |
|
| 16:50 - 17:10 |
› Detection sensitivity study of local faults in spur gears based on realistic simulations - Lior Bachar, PHM Laboratory, Department of Mechanical Engineering, Ben-Gurion University of the Negev, P.O.B. 653, Beer-Sheva 8410501 |
|
| 17:10 - 17:30 |
› Towards a better understanding of helical gears vibrations – dynamic model validated experimentally - nadav silverman, Ben Gurion University |
|
|
16:30 - 17:30
|
Signal processing (Auditorium "La Rotonde") - J.-L. Dion |
|
| 16:30 - 16:50 |
› Comparison and Improvement of Techniques for Transmission-Path Restoring - Omri Matania, PHM Lab, Department of Mechanical Engineering, Ben-Gurion University of the Negev, |
|
| 16:50 - 17:10 |
› Influence of Gaussian Signal Distribution Error on Random Vibration Fatigue Calculations - Yuzhu Wang, Laboratoire de Mécanique Gabriel Lamé |
|
| 17:10 - 17:30 |
› Helicopter transmission gearbox fault detection using an enhanced minimum entropy deconvolution adjusted method - Xin Zhang, Univ Lyon, INSA-Lyon, School of Aeronautics and Astronautics, Sichuan University |
|
|
16:30 - 17:30
|
Data Mining Classification & Machine Learning methods (Amphi Ouest) - J. Antoni |
|
| 16:30 - 16:50 |
› Rotating machine diagnosis using acoustic imaging and artificial intelligence |
|
| 16:50 - 17:10 |
› Macroscopic-Microscopic Attention in LSTM Networks based on fusion Features for prediction of bearing remaining life - yi qin, State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, College of Mechanical Engineering, Chongqing University, Chongqing 400044 - Sheng Xiang, College of Mechanical Engineering, Chongqing University, Chongqing 400044, State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044 - Haoran Yan, State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, College of Mechanical Engineering, Chongqing University, Chongqing 400044 |
|
| 17:10 - 17:30 |
› Milling diagnosis using machine learning approaches - Dominique Knittel, University of Strasbourg, Faculty of Physics and Engineering, Laboratoire d'étude des microstructures et de mécanique des matériaux |
|
|
19:30 - 22:00
|
GALA DINNER (please be at the boat before 20:00, then it will travel on the river) |
|
| Time |
Event |
|
|
09:00 - 09:45
|
Improving the Business Case to Expand the Condition Monitoring Market (Auditorium "La Rotonde") - Eric Bechhoefer |
|
|
09:45 - 10:45
|
CONTEST Results (Auditorium "La Rotonde") |
|
|
10:45 - 12:45
|
Tutorial - Nonlinear Vibration Analysis of Modern Structures Using the NI2D Software: From Setup Preparation to Nonlinear Model Updating and Simulations (107) - Thibaut Detroux |
|
|
11:00 - 11:25
|
Coffee break |
|
|
11:25 - 12:25
|
Data Mining Classification & Machine Learning methods ("René Char") - K. Gryllias |
|
| 11:25 - 11:45 |
› Multi-label fault diagnosis based on Convolutional Neural Network and Cyclic Spectral Coherence - Konstantinos Gryllias, Dynamics of Mechanical and Mechatronic Systems, Flanders Make, KU Leuven, Faculty of Engineering Science, Department of Mechanical Engineering, Division PMA, Celestijnenlaan 300 B, B-3001, Heverlee |
|
| 11:45 - 12:05 |
› A semi-supervised Support Vector Data Description- based fault detection method for rolling element bearings based on Cyclic Spectral Coherence - Chenyu Liu, Dynamics of Mechanical and Mechatronic Systems, Flanders Make, Division PMA, Department of Mechanical Engineering, Faculty of Engineering Science, KU Leuven |
|
| 12:05 - 12:25 |
› Big vibration data identification of bearing fault base on autoencoder network-based feature representation and optimal LSSVM-PSO classifier model - V Hung Nguyen, JunSheng Cheng, TienDung Hoang |
|
|
11:25 - 12:25
|
Angular approaches (Amphi Est) - F. Girardin |
|
| 11:45 - 12:05 |
› Angular vibration on-site measurements and application to torsional analysis on industrial cases - Francois Combet, DYNAE |
|
| 12:05 - 12:25 |
› Towards the use of hybrid models for diagnosis and prognosis in turbomachinery health management - Stephan Heyns, University of Pretoria [South Africa] |
|
|
11:25 - 12:45
|
Fault diagnosis and prognosis for rolling bearings (Amphi Ouest) - G. Dalpiaz |
|
| 11:25 - 11:45 |
› Early bearing defect detection in a noisy environment based on a method combining singular value decomposition and empirical mode decomposition - Marc Thomas, École de technologie Superieure, Ecole de Technologie Supérieure [Montréal] |
|
| 11:45 - 12:05 |
› Prognostics of rolling element bearings based on Entropy indicators and Particle Filtering - Junyu Qi, Dynamics of Mechanical and Mechatronic Systems, Flanders Make, Division PMA, Department of Mechanical Engineering, Faculty of Engineering Science, KU Leuven |
|
| 12:05 - 12:25 |
› Spall Evolution in a Rolling Element Bearing - Dmitri Gazizulin - Department of Mechanical Engineering [Beer-Sheva] |
|
| 12:25 - 12:45 |
› Adaptive tacho information estimation for surveillance of rotatory machine under nonstationary conditions - Yi Wang, Chongqing University, College of mechanical engineering, Chongqing university |
|
|
12:25 - 13:40
|
Lunch |
|
|
13:40 - 14:40
|
Data Mining Classification & Machine Learning methods (Amphi Est) - M. El Badaoui |
|
| 13:40 - 14:00 |
› Machine teaching to optimize algorithms performances on restricted dataset. - Alexandre Carbonelli, VIBRATEC - Maurin WAUSSEN, VIBRATEC |
|
| 14:00 - 14:20 |
› Effects of the Particle Swarm Optimization parameters for structural dynamic monitoring of cantilever beam - Xiao-Lin LI, Laboratoire de Mécanique Gabriel Lamé |
|
| 14:20 - 14:40 |
› The virtual machine : a signal generator based on realistic dynamic behavior - Didier REMOND, Univ Lyon, INSA-Lyon, CNRS UMR5259, LaMCoS, F-69621, France - Adeline BOURDON, Univ Lyon, INSA-Lyon, CNRS UMR5259, LaMCoS, F-69621, France |
|
|
13:40 - 14:40
|
Condition Monitoring (Amphi Ouest) - Y. Qin |
|
| 13:40 - 14:00 |
› CMBase, a universal gateway to condition monitoring datasets - Cécile Capdessus, Laboratoire Pluridisciplinaire de Recherche en Ingénierie et Systèmes, Mécanique, Energétique - Frédéric Bonnardot, Laboratoire dÁnalyse des Signaux et des Processus Industriels |
|
| 14:00 - 14:20 |
› Experimental investigation of sensor mounting positions for localized faults detection of epicyclic gear sets - YU GUO, Kunming University of Science and Technology |
|
| 14:20 - 14:40 |
› Towards 3D AFM Using Multiple Vibration Modes - Eyal Rubin, Dynamics Laboratory, Mechanical Engineering, Technion |
|
|
